LT Security LTD1651M5 - Manual (Page 19)

III. Main Menu Programming
1. Overview Main Menu
Before using your DVR for the first time, you will want to establish the initial settings.
This includes setting items such as time and date, password, display, record mode,
network and so on.
In order to program Main Menu, first press MENU button of front panel in DVR.
If ADMIN LOCK is set as YES (factory default is YES), below figure will be appeared.
Then input password number using 1, 2, 3, … , 9 Channel Buttons (Factory default is
to press “1” button 8 times), and press ENTER button. MAIN MENU will be appeared.
NOTE:
To access the DVR Main Menu, press MENU. To escape MENU, ESC button can be
used. Buttons for movement in Menu are ◀ or ▶. Button for selection is ENTER,
Button for increasing or decreasing setting value is ▲ or ▼. Press ESC to return to the
previous MENU after setting and to save the values of setup.
◀(LEFT), ▶(RIGHT), ▲(UP), ▼(DOWN) and ENTER (CENTER)
buttons.
14