LT Security LTD1651M5 - Manual (Page 33)

Exit this menu.
1) Event Setup1 parameter Setting
- Quality: VERY LOW, LOW, STANDARD, HIGH, VERY HIGH
- FPS: 30 to 1 FPS.(NTSC)/ 25 to 1 FPS (PAL)
- EVENT: ALARM or MOTION
- PRE (Pre-recording): ON/ OFF
- Lock: ON or OFF (If “Lock” is ON, this recorded file isn’t be deleted, even though
HDD over-writing is done. In order to protect HDD Full, it will be needed to
release LOCK function as “OFF” )
It can moved to each items by Movement button, LEFT or RIGHT , UP or DOWN
button. Each parameter can be adjusted by ENTER button.
Sensitivity (5 step):
Very Low, Normal, Very High
Sensor: N.O or N.C
Input: CH1 to CH16
Duration: recording time
Selection. (30 sec to 60min.)
Exit this menu.
2) Event Setup2 parameter Setting
Output:
Trigger Output Selection
Any output OFF, CH1 to CH4
can be selected.
Recording Quality (5 step):
Very Low, Standard, Very High
FPS: 1 to 30 FPS
Pre (Pre-recording): On/ Off
EVT (Event):
ALARM or MOTION
Buzzer: On/ Off
28