LT Security LTD1651M5 - Manual (Page 56)

While your DVR is in playback mode, the display channel which want to watch could be
selected by display selection button or single channel button. Fast forward (FF, ▶ ▶) or
fast backward playback (REW ◀◀) can be done by FF (▶▶) and REW (◀◀) button.
In order to freeze picture in playback, PLAY/PAUSE button is used. The movement of
single field in still picture mode can be fulfilled by LEFT or RIGHT button
.
And Jog and shuttle dial also enable user to use FF, REW as well as single frame
movement easily. Your DVR supports x2,x4,x8,x16 playback for Fast Forward, x2,x4,x8,
x16 play back for Fast Backward.
Note: This DVR support continuous playback.
For display channel selection, (Display selection button) can be pressed.
Whenever these button is pressed, display mode can be changed from QUAD, 9CH to
16CH display mode. Single channel display can be displayed by No 1 to No 16 button
display. QUAD display can be displayed by QUAD button. Whenever QUAD button is
pressed, displaying QUAD channel will be changed from CH1-CH4 to CH5-CH8,
CH8-CH12 and CH13-CH16.
< Playback single CH > < Playback 4 CH >
< Playback 9 CH > < Playback 16 CH >
< Playback Display Picture >
51
Playback audio selection for speaker output:
One of audio channels which want to output
through speaker can be selected by “MENU”
button just after pressing “F1” button.
Audio channel can be easily selected by
movement buttons in the figure.