LT Security LTD1651M5 - Manual (Page 38)

7. NETWORK SETUP
NETWORK SETUP in the main menu can be selected by movement button such as
LEFT , RIGHT or UP , DOWN button. If NETWORK is selected by ENTER button,
above “NETWORK SETUP” figure will be appeared.
1) CONNECT: STATIC or DHCP
STATIC IP or DHCP of CONNECT can be selected by LEFT or RIGHT button. Or
after pressing ENTER button, STATIC or DHCP can be selected by UP or DOWN
button. And then ENTER button is used for confirming setting value.
2) IP ADDRESS, 3) SUB NET MASK, 4) GATE WAY, 5) DNS:
If DHCP is selected in 1) CONNECT, IP ADDRESS/ SUBNET/ GATEWAY/ DNS will
be automatically assigned. But If STATIC is selected, manual input for IP ADDRESS/
SUBNET/ GATEWAY/ DNS will be needed in it.
33