LT Security LTD1651M5 - Manual (Page 26)

3. DISPLAY SETUP
To access DISPLAY SETUP, press ENTER button after moving highlight icon to
DISPLAY SETUP in MAIN MENU. Above menu will appear on monitor.
1) SEQ DEWLL TIME: NONE/ 1 to 60 seconds.
SEQ DWELL TIME can be adjusted using LEFT or RIGHT button. Or after pressing
ENTER button, SEQ DWELL TIME from none, 1 seconds to 60 seconds which
decide a period of channel by channel can be selected by UP or DOWN button.
And then ENTER button is used for confirming setting value.
- NOTE: It is just reflected in sequential display mode.
NOTE:
When all of menu setting are finished, menu mode is escaped, below figure “SAVE?”
which ask to save all the setting will be appeared. If all the menu setting is needed to
save, “Check Mark” can be pressed. If not, “X” can be selected.
21