LT Security LTD1651M5 - Manual (Page 39)

For assigning the number of IP address, SUBNET, Gateway and DNS in STATIC IP
mode, ENTER button can be pressed on the column of IP address, SUBNET,
Gateway and DNS. Then below new NETWORK SETUP figure will be appeared as
below figure.
The 4 number group with 3 digit expressing IP address, SUBNET, Gateway and DNS
can be increased by UP button or decreased by DOWN button. The position
movement between 4 numbers can be done by LEFT or RIGHT button.
The position movement from IP address, SUBNET to DNS can be done by UP or
DOWN button. In order to save the assigned number of IP address and so on, “Yes”
should be selected by ENTER button in “check box.
6) PORT : Port number for TCP/IP connection in DVR
Net-Viewer software should have same port Number to access remote DVR through
network.
Default Port No. is 10000. If Port is set as 10000, port number of from 10000 to 10020
is used in DVR. Therefore, If DVR is used in network environment with firewall, port
number of from 10000 to 10020 should be opened for DVR remote access.
If IP sharing machine or router is used with DVR, “port forwarding” should be done.
7) TIME ZONE : City Name
Time information can be synchronized with time server. For example, If Seoul is
selected, it is used to synchronize with Korean time, GMT + 9.
NOTE:
Time zone setting can be useful for Summer Time setting.
34