Vaisala Hydromet Data Collection Platform - Manual (Page 52)

User's Guide ______________________________________________________________________
50 ___________________________________________________________________M210784EN-E
displayed. If the request fails, a failure message is displayed
instead, and you have the option to try again at a later time. Factors
such as the current load on the logger, delays in the connection, and
the response length affect whether or not the timeout will expire
during a request.
7. In the IP addr./DNS name field, enter the destination IP address
or DNS name.
8. Enter the port to be used in the Port field. Note that for Client
socket, this must match the port set for incoming connections in
the interface configuration in the QML logger. For Server socket,
Host address and port defined for virtual COM port must match the
AWS Client IP address and port.
9. If support for Telnet escape sequences for binary file transfer is
required, select the Telnet option.
10. Save your settings and return to the Address Book window by
selecting Save.
Server Socket with SMS
It is possible to trigger server socket connection open from logger to
AWS Client by sending an SMS to the logger. This mode of connection
requires advanced configuration on the logger and a GSM modem
connected to the PC running the AWS Client software. For further
information, see section IP Service Connectivity with GSM in Vaisala
HydroMet™ Data Collection Platform User's Guide, Volume 3.
To add an Address Book entry for a server socket connection with SMS,
proceed as follows:
1. On the Settings menu, select Address Book.
2. Select New. The fields for selecting new connection parameters are
displayed.
NOTE In order to use the DNS name, must have access to a DNS server to be
able to resolve the DNS name to the IP address of the destination host.
NOTE For Server socket, the target IP addr./DNS name is not available in
the user interface.