Videoswitch Vi605 - Manual (Page 37)

Digital Recorder
33
Day Sequence Spot
This option specifies whether the spot monitor will auto-sequence when the Spot Daytime
starts, or if the unit powers up in the daytime.
[^][v] Select auto-sequence
[<] Exit this level
Night Spot Camera
This is the camera number that the spot monitor will display when the Spot Daytime ends, or
if the unit powers up in the night-time.
[^][v] Select camera
[<] Exit this level
Night Sequence Spot
This option specifies whether the spot monitor will auto-sequence when the Spot Daytime
ends, or if the unit powers up in the night-time.
[^][v] Select auto-sequence
[<] Exit this level
Power-Up Options
When the DVR powers up, for example following a power loss, the following settings may be
specified in the menu...
Main Monitor Format
Following power-up the main monitor screen format can be set to Full, PIP, Quad, x9
multiscreen or x16 multiscreen.
[^][v] Select format
[<] Exit this level
Sequence Main
Following power-up the main monitor may be set to auto-sequence.
[^][v] Select whether to auto-sequence
[<] Exit this level
Main Camera
Specify the full screen camera that will be displayed on power-up.
[^][v] Select camera
[<] Exit this level
PIP Camera
Specify the PIP camera that will be displayed on power-up if PIP mode has been selected.
[^][v] Select camera
[<] Exit this level