Videoswitch Vi605 - Manual (Page 49)

Digital Recorder
45
Recipient 3
Enter the email address of a third recipient that you wish to be notified in case of an alarm or
critical alert condition. Leave blank if not required.
Email Triggers
The following options determine under what conditions an email is sent:
Status Reports
The DVR can send routine status reports to provide a confidence check that the system is
operating correctly. Status report can be sent daily, weekly on monthly.
[^][v] Set report frequency
Status Report Time
The time of day that the routines status reports are sent can be set here:
[0..9] Enter time
[<][>] Move cursor
[^][v] Change digit at cursor
[TAG] Default
On Critical Alert
Enable this option if you want an email to be sent if a critical alert occurs
[^][v] Select whether emails are required
On Activity
Enable this option if you want an email to be sent if a activity occurs
[^][v] Select whether emails are required
On Alarm
Enable this option if you want an email to be sent if an alarm occurs
[^][v] Select whether emails are required
On Wireless PIR
Enable this option if you want an email to be sent if a wireless PIR alarm occurs
[^][v] Select whether emails are required
RS232
Some Videoswitcvh DVRs have an RS232 port that may be used for a varieny of purposes.
Remote access is possible via the PSTN telephone network using an external Vi-PSTN
module. Note that image update is not as fast as broadband via the Ethernet port.
Mode
Specify here what the RS232 port is to be used for
[^][v] Select the RS232 mode
[TAG] Set default
Baud Rate
[^][v] Select the required baud rate
[TAG] Set default