Digital recorder, 1 connecting up the vi101 – Videoswitch Vi605 User Manual
Page 6
Advertising
Digital Recorder
2
1.1 Connecting Up the Vi101
For a standard digital recording system you will need
The V101 recorder
Some cameras with lenses
A video monitor (with BNC composite video input).
BNC cables
Connect the monitor output (MAIN) of the Vi101 to a Video Monitor using a BNC cable
Make sure that the monitor termination is switched on (i.e. to 75 Ohms)
Connect a camera to Camera Input 1 on the Vi101 using a BNC cable
Connect further cameras to Inputs 2,3,4 etc
Make sure that the voltage select switch is set to suit the mains supply. The setting
required in UK and Europe is normally 230Vac.
Connect the mains power using the mains cable provided
Advertising