Videoswitch Vi605 - Manual (Page 40)

Digital Recorder
36
A block indicates that the activity is enabled, a dash that is it disabled.
Weekend Activity Times
Specify during which hours of the weekend the activity detection is active
[<][>] Move cursor to select hour of day
[^][v] Select whether alarm is active
A block indicates that the activity is enabled, a dash that is it disabled.
Enable Activity all day
This menu option allows some or all cameras to have their alarms enabled all day,
irrespective of the Weekday and Weekend alarm time settings.
[<][>] Move cursor to select camera
[^][v] Select whether activity is always active
Display Active Pixels
Selecting this option causes activated pixels to be highlighted on the normal full screen.
This option is useful when setting up and performing walk tests, but would typically be
turned off for normal operation.
[^][v] Select whether to display active pixels
Wireless PIR Inputs
UP to 64 wireless PIRs may be installed (for those models of Videoswitch DVRs that
support wireless PIRS).
Wireless PIRs are particularly suitable for perimeter protection where the sensors are widely
spaced and installing cabling would be inconvenient and expensive.
When a wireless PIR detects someone, the following actions may set set to occcur:
• Add event to event log
• Send an Email
• Call an alarm center
• Change record rate
• Change cameras that are recorded
• Pull-up alarmed camera onto a monitor
• Call up a preset on a dome camera
Wireless PIRs 1-16
The following menu options apply to wireless PIRS 1-16:
Enable PIRs
Specify which wireless PIRs are installed.
[<][>] Move cursor to select PIR
[^][v] Select whether PIR is installed
Weekday Times
Specify during which hours of the week the wireless PIR detection is active
[<][>] Move cursor to select hour of day