Dillon EDXtreme (Red) - Manual (Page 30)

EDXtreme User Instructions 29
Set Filter- Number of prior samples averaged to determine the displayed
value.
Contr Press this key to adjust the contrast of the LCD display. Press the Up soft
key to lighten the contrast. Press the Down soft key to darken the contrast.
There is a keypad shortcut for increasing and decreasing contrast. While
in normal display mode press Arrow key and F2 simultaneously to
increase contrast. Press Arrow key and F1 simultaneously to decrease
contrast.
Blite Press this key to adjust the backlight brightness and sleep timer functions.
Inten- Backlight intensity can be set to a value of 1 - 10. Default backlight
value is 5.
Press Arrow key and F4 simultaneously to increase intensity.
Press Arrow key and F3 simultaneously to decrease intensity
Mode- Select Backlight to operate as always On, always Off or the
backlight can operate from a configurable Timer.
If set to Timer, the operator will be asked to enter the Time in
Seconds, after motion stops that the backlight will shut off.
The next selection will allow the user to configure if motion resets
timer. Choose Yes or No to have motion reset the Timer which
turns off the backlight.
Sometimes the individual soft keys are referred to as the F1, F2, F3 and F4 keys as
numbered from left to right.
Use of the backlight will affect battery life.