Dillon EDXtreme (Red) - Manual (Page 39)

38 EDXtreme User Instructions
To configure radio:
1. Press Radio.
The following display appears.
2. Use the Sel keys to enable or disable the radio mode. If enabled, press the
Enter key to proceed.
3. You are asked to enter a Network ID#. This is a unique number (1-255) so the
Communicator only speaks to one instrument at a time without “cross-talking.”
Use the available soft keys to enter a number (1-255), then press Enter to
accept.
4. Key in the network name. This will be to identify each EDXtreme when displayed
on the handheld communicator.
5. Press Enter to return to the first soft key set of the Configuration menu.
5.1.3 Config--Mode
The next menu key is the Mode key. Use this key to choose what display mode is active
upon powerup.
1. Press the Mode key.
The following is displayed:
2. Select a display mode value using the Sel key to scroll through the choices.
Choices are Force(default), Peak, Dual, and Last. Press Enter to accept the
displayed setting.
l FORCE - Live force will be displayed
l PEAK - Peak force will be displayed
l DUAL - Live and Peak forces will be displayed
l LAST - The last displayed mode of operation will be displayed.
3. The display returns to the first soft key set of the Configuration menu.
Enter
Radio Mode: (*Enabled)
Sel Sel
Enter
PowerUp Disp. Mode:
(*Force)
Sel Sel