4 cleaning the machine, 5 training, 6 sharp objects – Dillon EDXtreme (Red) User Manual

Page 8: 7 fcc and emc declarations of compliance, 1 modifications, 2 radio safety, Modifications radio safety, 4 cleaning the machine 1.5 training

Advertising
background image

6

EDXtreme User Instructions

1.4 Cleaning the Machine

1.5 Training

Do not attempt to operate or complete any procedure on a machine unless you have
received the appropriate training or read the instruction books.

To avoid the risk of RSI (Repetitive Strain Injury), place the machine on a surface which
is ergonomically satisfactory to the user. Take frequent breaks during prolonged usage.

1.6 Sharp Objects

Do not use sharp objects such as screwdrivers or long fingernails to operate the keys.

1.7 FCC and EMC Declarations of Compliance

1.7.1 Modifications

The FCC states that any changes or modifications to this device that are not expressly
approved by Dillon may void the user’s authority to operate the equipment.

1.7.2 Radio Safety

The radiated output power of this device is far below the FCC radio frequency exposure
limits. Nevertheless, the device shall be used in such manner that the potential for
human contact during normal operation is minimized.

In order to avoid the possibility of exceeding the FCC radio frequency exposure limits,
human proximity to the antenna shall not be less than 3 inch (7.5 cm) during normal
operation. The antenna is located internal to the Communicator.

Table 1.1 Cleaning DOs and DON’Ts

DO

DO NOT

Wipe down the outside of standard products
with a clean cloth, moistened with water and
a small amount of mild detergent

Attempt to clean the inside of the machine
Use harsh abrasives, solvents, scouring cleaners or
alkaline cleaning solutions

Spray the cloth when using a proprietary
cleaning fluid

Spray any liquid directly on to the display windows

Advertising
This manual is related to the following products: