Labconco FlaskScrubber Vantage Series Glassware Washers 4540031 - Manual (Page 32)

Chapter 4: Using Your Washer
Product Service 1-800-522-7658 28
28
4.
Press the ▲ or ▼ buttons until the desired program is indicated by the arrow
on the left side. The arrow on the lower right side means that there are
additional program selections that will be shown on the display if the
▼
button is pressed. If an arrow is visible in the upper right corner of the
display, additional program selections will be displayed when the
▲ button is
pressed.
5.
Press RUN if no modifications to the program are necessary.
6.
If modifications to the program are necessary or you want to see the
parameters that are entered into the program, press DISPLAY and the
elements in the program that may be altered will be displayed.
7.
Press the ▲ and ▼ buttons to select the parameter that must be altered as
indicated by the arrow on the left side. Press
◄ and ► buttons to select the
appropriate set point. The arrow on the lower right side means that there are
additional parameter selections that will be shown on the display if the
▼
button is pressed. If an arrow is visible in the upper right corner of the
display, additional parameter selections will be displayed when the
▲ button
is pressed.
8.
Press RUN when all parameters are satisfactory.