Labconco FlaskScrubber Vantage Series Glassware Washers 4540031 - Manual (Page 42)

Chapter 5: Maintaining Your Washer
Product Service 1-800-522-7658 38
38
Replacing the HEPA Filter
After an extended period of time, dirt and debris may block the air flow through
the HEPA filter. The filter may be replaced by following the instructions below:
To replace the HEPA filter:
1.
Open the left door by pressing it in the center.
2.
Press down on the lock tab on the top of the HEPA filter and pull the top of
the filter outwards.
3.
Lift the filter out of the bottom retainer.