Dolphin Peripherals 6100 - Manual (Page 47)

2 - 31
EZConfig Client
EZConfig Client decodes bar codes created in EZConfig Editor and deploys the data in the terminal. In
addition, if the EXM file in the bar code is associated with an application, EZConfig Client launches that
application, which then processes the decoded data.
EZConfig Client decodes bar codes with 40-bit and 128-bit encryption.
Storage Location
The EZConfig Client executable is stored in the \IPSM (\Honeywell
for 6100/6500) folder.
For upgrades, EZConfig Client is located in the IPSM (\Honeywell for 6100/6500) image installed on the
workstation. This EXE must be copied and pasted into the \IPSM (\Honeywell
for 6100/6500) folder on
the terminal. For more information, see Installing an Upgrade on the Terminal on page 1-9.
Using EZConfig Client
1. On the Dolphin terminal, tap Start > Power Tools. The Dolphin Power Tools Main Window (see
page 1-2) opens.
You can scan the first bar code from the Power Tools main window by pressing the SCAN key; see
page
2-34 for details.
EZConfig Client can also be launched with a HotKey from any window; see page 2-34 for details.
2. Tap EZConfig Utilities > EZConfig Editor . The EZConfig Client window opens.
3. Point the terminal at the first EZConfig Editor bar code, then press the SCAN key.
4. EZConfig Client decodes the bar code.