Dolphin Peripherals 6100 - Manual (Page 94)

5 - 18
Symbologies Section
The Symbologies section specifies the settings for each of the symbologies supported by the decoder.
The settings are in the form:
Symbology Name=Enable(1 or 0), Parm1, Parm2, Parm3, Parm4, Parm5, Parm6, Parm7,
Parm8
Where
• Enable specifies that the symbology is enabled or disabled.
• Parms1–8 specify the settings for the symbology.
For more information regarding the individual settings for each of the symbologies, refer to the Dolphin
Decode API documentation in the Dolphin SDK documentation.
Symbologies Settings
0=Disabled 1=Enabled
ScanWedge Entry Default Enabled/
Disabled Value Default Value
Australian Post 0=Disabled 0,0,0,0,0,0,0,0,0
Aztec Code 1=Enabled 1,1,3750,0,0,0,0,0,0
Aztec Mesas
(This code is not available on
the Dolphin 6100/6500/7600.)
0=Disabled 0,0,0,0,0,0,0,0,0
British Post 0=Disabled 0,0,0,0,0,0,0,0,0
Canadian Post 0=Disabled 0,0,0,0,0,0,0,0,0
China Post 0=Disabled 0,4,80,0,0,0,0,0,0
Codabar 1=Enabled 1,0,0,0,4,60,0,0,0
Codablock 0=Disabled 0,1,2048,0,0,0,0,0,0
Code 11 0=Disabled 0,1,4,80,0,0,0,0,0
Code 128/GS1-128 1=Enabled 1,0,80,0,0,0,0,0,0
Code 16K 0=Disabled 0,1,160,0,0,0,0,0,0
Code 32 0=Disabled 0,0,0,0,0,0,0,0,0
Code 39 1=Enabled 1,0,0,0,0,0,0,48,0