Dolphin Peripherals 6100 - Manual (Page 76)

4 - 8
AutoInstall.exm
The AutoInstall.exm file controls the behavior and appearance of the Autoinstall window and install
process.
Note: Remember! It’s the Autorun.exm file that determines the programs and install sequence, not AutoInstall.exm.
Command Line Arguments
/copy Add / copy to the Autorun.exm file to automatically move a file from one location to another.
Usage autoinstall /copy <sourcefilename> <destination>
Example autoinstall /copy "/windows/data.mdf" "/storage card/data.mdf"
Key Function Default
Value Available Values
Version This is the current version of the AutoInstall.exm
file.
This key is read-only and cannot be modified. 3 N/A
Debug Enable and disables logging of debug information
to
\IPSM\AUTOINSTALL.LOG (\Honeywell for
6100/6500).
0 0=Disabled
1=Enabled
Cancel Enable and disables the Cancel button on the
AutoInstall window. 0 0=Disabled
1=Enabled
FullScreen Determines if the AutoInstall window runs in full
screen mode (barring access to other windows). 1 0=Disabled
1=Enabled
2=Autoselects based on
the operating platform.
HaltOnError Sets the behavior of AutoInstall when an error is
encountered. 1 0=Log the error and
continue AutoInstall
1=Halt AutoInstall and
prompt the user to
continue or cancel
MaskPassword If a password is entered in the Password key, this
key determines if that password is masked when
entered on the screen. 1 0=Disabled
1=Enabled
Password Establishes a password required to halt
AutoInstall. Blank Blank=User can halt and
exit AutoInstall without
entering a password
X=Password
AutoInstall
window