Dolphin Peripherals 6100 - Manual (Page 60)

3 - 10
3. Copy the first number underneath Services. This is the hex value for the Service key field; “1101” in
the illustration above.
Note: For more detailed information about RegEdit, see RegEdit on page 8-1.
GSM Section—Dolphins 7900 and 9500
The GSM section configures the GSM/GPRS radio on the Dolphin 7900 and 9500. If there is no GSM
radio installed in the terminal, disable this section.
Key Description Default
Value Available Value
Enable Enables and disables the GSM radio. 0 0=Disable
1=Enable; when enabled, the WLAN
radio turns off automatically.
APN Enter the Access Point Name (APN) for
the GPRS network. Empty APN value
IPAddress Enter the IP Address. Empty Empty=GSM uses DHCP (server-
assigned IP address)
X=IP address
Protocol Enter the protocol to use. IP Protocol type
Username Enter the username for the GPRS
connection. Variable Empty=Disabled
0=Disabled
X=The username for the GPRS
connection.
Password Enter the password associated with the
username for the GPRS connection.
Note: This key is encrypted; see
Encrypted on page 2-13.
Variable Empty=Disabled
0=Disabled
X=The password for the GPRS
connection.
ActiveSync Section
The ActiveSync Section configures the terminal’s ActiveSync connection parameters.
Key Description Default
Value Available Values
AutoConnect Enables and disables the ActiveSync
connection when the terminal first
connects to the communication peripheral. 1 0=Disable ActiveSync connection
1=Enable ActiveSync connection