Dolphin Peripherals 6100 - Manual (Page 9)

1 - 3
Icon Name Description See Page
Battery
Analyzer Helps manage the battery. 7-1
BattMon Programs the LEDs on the top panel to monitor battery power. 6-2
EZConfig
Utilities Opens a window that displays the EZConfig utilities on the terminal.
• EZConfig Editor on the Terminal (see page 2-27)
• EZConfig Client (see page 2-31)
2-1
HotKeys* Activates button assignments in the Buttons setting. 6-5
Keyboard
Status* Puts an icon on the Navigation bar that indicates the alpha-numeric
status of the keyboard. 6-7
NoSIP* Turns off the Soft Input Panel (SIP) in every application window. 6-9
Network
Utilities Opens a window that displays the Network utilities:
• IP Config (see page 10-2)
• Ping (see page 10-4)
• Route (see page 10-6)
• WiFi Status (see page 10-10)
• Backup Radio Settings (see page 10-12)
• Restore Radio Settings (see page 10-12)
10-1
RASMan* Establishes a remote access service (RAS) connection. 6-11
Reboot Performs a warm or cold boot from the touch screen, as opposed to
the keyboard commands. 6-14
RegBackup Backs up the registry. 8-6 & 8-11
RegEdit Allows you to edit the registry and import and export registry keys. 8-1
RegRestore Loads the RegBackup file. 8-7 & 8-12
ScanWedge Enables the Dolphin terminal to interpret as keystrokes data
received via the decoder, serial port, or IrDA interface. 5-1
SetRAM* Allows you to re-set the memory allocation; applies only to Windows
Mobile 5.0-based terminals. 11-1
Suspend Manually puts the terminal into Suspend mode from the touch
screen, as opposed to the keyboard commands or time-out
settings. 6-15
SysInfo Displays system information. 6-16