IDK MSD-804FD - Manual (Page 25)

MSD-804FD Users Guide (Command Guide)
25
3.3.4 Position, size, and masking
@SOT Set output resolution
Command format @SOT, ch_1, resolution_1 (, ch_2, resolution_2･･･)
Return value
format @SOT, ch_1, resolution_1 (, ch_2, resolution_2･･･)
Parameter ch_1-4 : Output
0 = All outputs, 1 = OUT1 to 4 = OUT4
resolution_1-4 : Output resolution
0 = AUTO-A [Default], 1 = AUTO-B *1 ,
2 = VGA@60(640x480), 3 = SVGA@60(800x600),
4 = XGA@60(1024x768), 5 = WXGA@60(1280x768),
6 = WXGA@60(1280x800), 7 = Quad-VGA@60(1280x960),
8 = SXGA@60(1280x1024), 9 = WXGA@60(1360x768),
10 = WXGA@60(1366x768), 11 = SXGA+@60(1400x1050),
12 = WXGA+@60(1440x900), 13 = WXGA++@60(1600x900),
14 = UXGA@60(1600x1200), 15 = WSXGA+@60(1680x1050),
16 = VESAHD@60(1920x1080), 17 = WUXGA@60(1920x1200),
18 = QWXGA@60(2048x1152), 19 = [email protected](720x480),
20 = [email protected](720x480), 21 = 576i@50(720x576),
22 = 576p@50(720x576), 23 = 720p@50(1280x720),
24 = [email protected](1280x720), 25 = 720p@60(1280x720),
26 = 1080i@50(1920x1080), 27 = [email protected](1920x1080),
28 = 1080i@60(1920x1080), 29 = 1080p@50(1920x1080),
30 = [email protected](1920x1080), 31 = 1080p@60(1920x1080)
*1 AUTO-B can be set only if Cat5e/Cat6 output option is installed.
Example Send
Receive
@SOT,1,11
@SOT,1,11
Set output resolution of OUT1 to SXGA+.
Terminated normally.
Send
Receive
@GOT,2,11
@ERR,1
Get output resolution.
If “frame lock mode setting” is ON, all output
resolutions are the same. Only OUT1 can be
set.
Related info. 8.3.1 Output resolutions