IDK MSD-804FD - Manual (Page 82)

MSD-804FD Users Guide (Command Guide)
82
@SGW Set LAN gateway address
Command
format @SGW, unit_1, unit_2, unit_3, unit_4
Return value
format @SGW, unit_1, unit_2, unit_3, unit_4
Parameter unit_1 : Upper bti of the gateway address to unit_4 : Lower bit of the gateway
address
0 to 255 = 8 bit (Decimal notation) [Default]: 192.168.001.201
Example Send
Receive
@SGW,192,168,1,254
@SGW,192,168,1,254
Set LAN gateway address to
“192.168.1.254”.
Terminated normally.
Related info. 8.11.3 Gateway address
Note After IP address or serial communication setting is changed, communication may be
disabled. Change environmental settings based on the settings of the MSD.
@GGW Get LAN gateway address
Command
format @GGW
Return value
format @GGW, unit_1, unit_2, unit_3, unit_4
Parameter unit_1 : Upper bit of the gateway address to unit_4 : Lower bit of the gateway
address
0 to 255 = 8 bit (Decimal notation) [Default]: 192.168.001.201
Example Send
Receive
@GGW
@GGW,192,168,1,254
Get LAN gateway address
Gat LAN gateway address:“192.168.1.254”
Related info. 8.11.3 Gateway address
@SBG Set OUTB gateway address
Command
format @SBG, unit_1, unit_2, unit_3, unit_4
Return value
format @SBG, unit_1, unit_2, unit_3, unit_4
Parameter unit_1 : Upper bit of the OUTB gateway address to unit_4 : Lower bit of the OUTB
gateway address
0 to 255 = 8 bit (Decimal notation) [Default]: 192.168.001.201
Can be set only if Cat5e/Cat6 output option is installed.
Example Send
Receive
@SBG,192,168,1,254
@SBG,192,168,1,254
Set OUTB gateway address to
“192.168.1.254”.
Terminated normally.
Related info. 8.11.3 Gateway address
Note After IP address or serial communication setting is changed, communication may be
disabled. Change environmental settings based on the settings of the MSD.