IDK MSD-804FD - Manual (Page 5)

MSD-804FD Users Guide (Command Guide)
5
1 Communication specifications
1.1 RS-232C Port
The MSD-804FD controls peripheral devices externally by serial communication with RS-232C connector.
Connect control devices such as computers and the MSD with a RS-232C cable, and then control the MSD
and acquire status using commands. For command character notations and RS-232C connector
configuration, see sections “2 ASCII codes” in this manual and “8.10 COM Ports” in Users Guide.
[Table 1.1] Spec of serial communication
Compliance
standard RS-232C
Baud rate 4800, 9600, 19200, 38400 [bps]
Data bit 8, 7 [bit]
Parity check None, even, odd
Stop bit 1, 2 [bit]
X parameter Invalid
Flow control None
Delimiter CR LF (Carriage return and line feed, 0D and 0A in
hexadecimal)
Communication
pattern Full duplex
[Figure 1.1] Spec of RS-232C connectors and cables