IDK MSD-804FD - Manual (Page 60)

MSD-804FD Users Guide (Command Guide)
60
@HAU Re-authorize HDCP
Command
format @HAU, ch_1, (, ch_2･･･)
Return value
format @HAU, ch_1, (, ch_2･･･)
Parameter ch_1-8 : Output
0 = All outputs, 1 = OUT1A to 4 = OUT4A, 5 = OUT1B to 8 = OUT4B*
* OUT1B to OUT4B can be set only if Cat5e/Cat6 output option is installed.
Example Send
Receive
@HAU,1
@HAU,1
Authorize HDCP of the display device connected to
OUT1A again.
Terminated normally.
Related info. 8.7.13 HDCP re-authorization
@SFL Set frame lock mode
Command
format @SFL, framelock
Return value
format @SFL, framelock
Parameter framelock : Set framelock mode.
0 = OFF [Default], 1 = ON
Example Send
Receive
@SFL,1
@SFL,1
Set frame lock mode ON.
Terminated normally.
Related info. 8.7.14 Frame lock mode
@GFL Get frame lock mode
Command
format @GFL
Return value
format @GFL, framelock
Parameter framelock : Set framelock mode.
0 = OFF [Default], 1 = ON
Example Send
Receive
@GFL
@GFL,1
Get frame lock mode ON.
Terminated normally.
Related info. 8.7.14 Frame lock mode