Lencore Spectra i.Net: Installation and Operations Manual User Manual
Page 36
section 5
5.13 | using the handheld remote
section 5
You will also notice that the green LED light will stay lit while the remote is depressed, visually cueing
that the remote is working and the OP is responding to the remote’s signals.
When you are satisfied that the space has been tuned to the proper dBA level and has achieved
proper sound uniformity, you can close up the remaining ceiling tiles to complete the project.
Remove any debris created on site and contact your project team leader or Lencore to let them
know the work had been completed.
Tuning the sound masking correctly is extremely important. The measure of the projects success will
be measured by the quality of the sound. Ensure that the correct and appropriate amount of time is
spent tuning and fine tuning the entire project.
USING THE HAND HELD REMOTE CONTROL:
32