OnLine Power Signal Saver IPC - Manual (Page 53)

6002-1842 Rev A ECO# 8881
43
2.2.14 Alarm Submenu
Purpose: Describes the Alarm Submenu and how to use the LCD for troubleshooting. (Figures 12, 13 and
14)
Procedure:
When the red ALARM LED is FLASHING, the unit has an alarm, a condition not serious enough to stop it
from providing output power. To see what the alarm condition is, go to the STATUS submenu, then use the
down arrow key until the Alarm menu appears. Press ENTER and one of the Alarm conditions described in
Figure 14 appears on the LCD.