OnLine Power Signal Saver IPC - Manual (Page 63)

6002-1842 Rev A ECO# 8881
53
Figure 26
Properties Screen
Figure 27
ASCII Setup Screen
Step 8:
The [Name of Unit] Properties screen appears
(Figure 26).
Click on the Settings Tab. Select the fields as shown.
Step 9:
Click the ASCII Setup button.
Step 10:
Select the fields in the ASCII Setup screen (Figure
27) as shown.
Step 11:
Click OK. The [Name of Unit] properties window
(Figure 26) reappears.
Step 12:
Click OK. ASCII Setup Screen
HyperTerminal setup is completed.
Press Enter to go to BBS’s screen (Figure 25).
Press Enter to access the unit via com port
communications.
The Com Port Main Menu (Figure 28) appears.