HP Z34C G3 34" 21:9 Curved WQHD IPS Monitor - Manual (Page 12)

1. With the monitor placed facedown inside the box, tear open the packaging bag along the tear line (1),
and then slide the top of the mounting plate on the stand under the upper lip of the recess in the back of
the panel (2).
2. With the monitor still placed facedown inside the box, install the base (1), and then rotate the two
captive screws clockwise to secure the base (2).
Mounting the monitor head
To attach your monitor to a wall using a swing arm or other mounting fixture, follow the steps in this section
to safely and securely connect your monitor.
IMPORTANT: This monitor supports the VESA industry-standard 100 mm mounting holes. To attach a third-
party mounting solution to the monitor head, use four 4 mm, 0.7 pitch, and 10 mm long screws. Longer
screws might damage the monitor. Be sure that the manufacturer’s mounting solution is compliant with the
VESA standard and is rated to support the weight of the monitor head. For best performance, use the power
and video cables provided with the monitor.
NOTE: This apparatus is intended to be supported by a UL-listed or CSA-listed wall-mount bracket.
Removing the monitor stand
If you decide to use a wall mount instead of the monitor stand that you attached, first remove the stand.
Mounting the monitor head 7