HP Z34C G3 34" 21:9 Curved WQHD IPS Monitor - Manual (Page 17)

3. Connect a USB cable.
● Connect one end of the USB Type-B cable to a USB Type-B port on the monitor and the other end to
a USB Type-A port on the source device.
NOTE: You must connect the USB Type-A to USB Type-B or USB Type-A to USB Type-C cables from the
source device (computer, laptop, gaming console) to the rear of the monitor to enable the USB Type-A
ports on the monitor. For more information, see Connecting USB devices (select products only) on page
13 .
4. Connect the power cord to the power connector on the monitor, and connect the other end to a grounded
AC outlet.
WARNING! To reduce the risk of electric shock or damage to the equipment:
Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
Plug the power cord into a grounded (earthed) AC outlet that is easily accessible at all times.
Disconnect power from the equipment by unplugging the power cord from the AC outlet.
For your safety, do not place anything on power cords or cables. Arrange them so that no one can
accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging the power cord
from the AC outlet, grasp the cord by the plug.
12 Chapter 1 Getting started