HP Z34C G3 34" 21:9 Curved WQHD IPS Monitor - Manual (Page 14)

1. Remove the two screws from the Vesa holes located on the rear of the monitor head (1), and then
remove the screw fastener (2).
2. Align the Vesa adapter with the screw holes located on the rear of the monitor head (1), and then install
the two screws to secure the adapter (2).
3. To attach the monitor head to a swing arm or other mounting device, insert four mounting screws
through the holes on the mounting device and into the VESA screw holes on the back of the monitor
head.
IMPORTANT: If these instructions do not apply to your device, then follow the mounting device
manufacturer’s instructions when mounting the monitor to a wall or swing arm.
Attaching the monitor head to a mounting device 9