Speakers, Removing the speakers – Dell 14" Mobile Precision 3470 Mobile Workstation (Silver) User Manual
Page 39
Steps
1. Align the screw holes on the heat sink and fan assembly with the screw holes on the system board.
2. In sequential order (as indicated on the heat sink), tighten the four screws (M2x3) that secure the heat sink and fan
assembly to the system board.
3. Replace the two screws (M2x5) that secure the system fan to the frame.
4. Connect the system fan cable to the connector on the system board.
Next steps
1. Install the
.
2. Install the
.
3. Follow the procedure in
After working inside your computer
.
Speakers
Removing the speakers
Prerequisites
1. Follow the procedure in
Before working inside your computer
.
.
.
.
.
About this task
The following image indicates the location of the speakers and provide a visual representation of the removal procedure.
Removing and installing components
39