Brother ADS-3100 High-Speed Desktop Color Scanner for Home & Small Offices - Manual (Page 141)

Home > Security > Configure Certificates for Device Security > Create CSR and Install a Certificate from a
Certificate Authority (CA) > Install a Certificate on Your Machine
Install a Certificate on Your Machine
Related Models : ADS-3300W
When you receive a certificate from a CA, follow the steps below to install it into the scan server:
Only a certificate issued with your machine's CSR can be installed onto the machine. When you want to create
another CSR, make sure that the certificate is installed before creating another CSR. Create another CSR only
after installing the certificate on the machine. Otherwise, the CSR you create before installing will be invalid.
1. Start your web browser.
2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
https://192.168.1.2
3. If required, type the password in the Login field, and then click Login .
The default password to manage this machine’s settings is located on the back of the machine and marked
"
Pwd ".
4. Go to the navigation menu, and then click Network > Security > Certificate .
Start from , if the navigation menu is not shown on the left side of the screen.
5. Click Install Certificate .
6. Browse to the file that contains the certificate issued by the CA, and then click Submit .
The certificate has been created and saved in your machine's memory successfully.
To use SSL/TLS communication, the Root Certificate from the CA must be installed on your computer. Contact
your network administrator.
Related Information
• Create CSR and Install a Certificate from a Certificate Authority (CA)
Related Topics:
• Access Web Based Management
137