Vivotek FD9388-HTV 5MP Outdoor Network Dome Camera with Night Vision User Manual
Page 135
VIVOTEK
User's Manual - 135
A green bar indicates that even though motions have been detected, the event has not been
triggered because the image variations still fall under the preset threshold.
If you want to configure other motion detection settings for day/night/schedule mode (e.g., for a
different lighting condition), please click
Profile
to open the Motion Detection Profile Settings page
as shown below. Another three motion detection windows can be configured on this page.
Larger than the
min. item size
Photos or videos can be captured instantly and configured to be sent to a remote server (via an
Email or FTP server). For more information on how to configure an event setting, please refer to
Please follow the steps beolw to set up a profile:
1. Create a new motion detection window.
2. Click the
Profile mode
tab.
3. Select the applicable Schedule mode. Please manually enter a time range.
4. Click
Save
to enable the settings and click
Close
to exit the page.