Vivotek FD9388-HTV 5MP Outdoor Network Dome Camera with Night Vision - Manual (Page 141)

VIVOTEK
User's Manual - 141
To start a module, select the checkcircle in front, and click the Start button.
If you should need to remove a module, select the checkcircle in front and then click the
Stop button. By then the module status will become OFF , and the X button will appear at
the end of the row. Click on the X button to remove an existing module.
When prompted by a confirm message, Click Yes to proceed.
Yes No
Note that the actual memory consumed while operating the module will be indicated on the
Memory status field. This helps determine whether a running module has consumed too
much of system resources.
To utilize a software module, acquire the software package and click Browse and Upload
buttons. The screen message for a successful upload is shown below: