Vivotek FD9388-HTV 5MP Outdoor Network Dome Camera with Night Vision - Manual (Page 315)

VIVOTEK
User's Manual - 315
© 2019 VIVOTEK INC. All Right Reserved
182
7.28 Customized Event Script
Group: event_customtaskfile_i <0~2>
PARAMETER VALUE SECURITY
(get/set) DESCRIPTION
name string[40] 6/6 Custom script identification of this
entry.
date string[4~20] 6/6 Date of custom script.
time string[4~20] 6/6 Time of custom script.
7.29 Event Setting
Group: event_i <0~(n-1)> n denotes the value of "capability_nevent"
(capability_nevent > 0)
PARAMETER VALUE SECURITY
(get/set) DESCRIPTION
name string[40] 6/6 Identification of this entry.
enable 0, 1 6/6 Enable or disable this event.
priority 0, 1, 2 6/6 Indicate the priority of this event:
“0”= low priority
“1”= normal priority
“2”= high priority
delay 1~999 6/6 Delay in seconds before detecting the
next event.
© 2019 VIVOTEK INC. All Right Reserved
183
PARAMETER VALUE SECURITY
(get/set) DESCRIPTION
trigger boot,
di,
pir,
motion,
seq,
recnotify,
tampering,
vi,
volalarm,
visignal,
vadp,
smartsd
<product
dependent>
6/6 Indicate the trigger condition:
"boot" = System boot.
"di"= Digital input.
"pir"= PIR detection.
"motion" = Video motion detection.
"seq" = Periodic condition.
"visignal" = Video input signal loss.
"recnotify" = Recording notification.
"tampering" = Tamper detection.
"vi"= Virtual input (Manual trigger).
"volalarm"= Audio detection.
"smartsd"= Lifetime detection of SD card.
"shockalarm" = Shock detection.
"virestore" = Video input signal restore.
"vadp" = VADP trigger.
* "smartsd" is only valid when smart SD
card is inserted
triggerstatus string[40] 6/6 The status for event trigger
di 0,<positive
integer> 6/6 Indicate the source id of di trigger.
This field is required when trigger
condition is “di”.
One bit represents one digital input. The
LSB indicates DI 0.
* Only available when "capability_ndi" >
0
mdwin 0,<positive
integer> 6/6 Indicate the source window id of motion
detection.
This field is required when trigger
condition is “md”.
One bit represents one window.
The LSB indicates the 1
st window.
For example, to detect the 1 st and 3 rd
windows, set mdwin as 5.
mdwin0 0,<positive
integer> 6/6 Similar to mdwin. The parameter takes
effect when profile 1 of motion detection
is enabled.