11 ip filtering for onvif – Vivotek FD9388-HTV 5MP Outdoor Network Dome Camera with Night Vision User Manual
Page 363
VIVOTEK
User's Manual - 363
© 2019 VIVOTEK INC. All Right Reserved
230
PARAMETER
VALUE
DESCRIPTION
addpos
<Text string less than
40 characters>
Add one preset location to the preset list.
delpos
<Text string less than
40 characters>
Delete preset location from the preset list.
return
<return page>
Redirect to the page <return page> after the parameter is
assigned. The <return page> should be the relative path
according to the root of camera. If you omit this
parameter, it will redirect to an empty page.
* If the <return page> is invalid path, it will ignore this
parameter.
8.11 IP Filtering for ONVIF
Syntax:<product dependent>
http://<
servername
>/cgi-bin/admin/ipfilter.cgi?type[=<value>]
http://<
servername
>/cgi-bin/admin/ipfilter.cgi?method=add<v4/v6>&ip=
<ipaddress>
[&index=<val
ue>][&return=<
return page
>]
http://<
servername
>/cgi-bin/admin/ipfilter.cgi?method=del<v4/v6>&index=<value>[&return=<
retu
rn page
>]
PARAMETER
VALUE
DESCRIPTION
type
NULL
Get IP filter type
allow, deny
Set IP filter type
method
addv4
Add IPv4 address into access list.
addv6
Add IPv6 address into access list.
delv4
Delete IPv4 address from access list.
delv6
Delete IPv6 address from access list.
ip
<IP address>
Single address: <IP address>
Network address: <IP address / network mask>
Range address:<start IP address - end IP address>
index
<value>
The start position to add or to delete.
© 2019 VIVOTEK INC. All Right Reserved
231
8.12 UART HTTP Tunnel Channel
(capability_nuart > 0)
Note:
This request requires Operator privileges.
Method:
GET and POST
Syntax:
http://<
servername
>/cgi-bin/operator/uartchannel.cgi?[channel=<value>]
-------------------------------------------------------------------------
GET /cgi-bin/operator/uartchannel.cgi?[channel=<value>]
x-sessioncookie: string[22]
accept: application/x-vvtk-tunnelled
pragma: no-cache
cache-control: no-cache
-------------------------------------------------------------------------
POST /cgi-bin/operator/uartchannel.cgi
x-sessioncookie: string[22]
content-type: application/x-vvtk-tunnelled
pragma : no-cache
cache-control : no-cache
content-length: 32767
expires: Sun, 9 Jam 1972 00:00:00 GMT
User must use GET and POST to establish two channels for downstream and upstream. The
x-sessioncookie in GET and POST should be the same to be recognized as a pair for one session. The
contents of upstream should be base64 encoded to be able to pass through a proxy server.
This channel will help to transfer the raw data of UART over the network.
Please see UART tunnel spec for detail information
PARAMETER
VALUE
DESCRIPTION
channel
0 ~ (n-1)
The channel number of UART.