Client settings, Please refer to – Vivotek FD9388-HTV 5MP Outdoor Network Dome Camera with Night Vision User Manual

Page 39

Advertising
background image

VIVOTEK

User's Manual - 39

Client Settings

This chapter explains how to select the stream transmission mode and saving options on the

local computer. When completed with the settings on this page, click

Save

on the page bottom

to enable the settings.

H.265/H.264 Protocol Options

Depending on your network environment, there are four transmission modes of H.264 streaming:

UDP unicast

: This protocol allows for more real-time audio and video streams. However, network

packets may be lost due to network burst traffic and images may be broken. Activate UDP connection

when occasions require time-sensitive responses and the video quality is less important. Note that each

unicast client connecting to the server takes up additional bandwidth and the Network Camera allows up

to ten simultaneous accesses.

UDP multicast

: This protocol allows multicast-enabled routers to forward network packets to all clients

requesting streaming media. This helps to reduce the network transmission load of the Network Camera

while serving multiple clients at the same time. Note that to utilize this feature, the Network Camera must

be configured to enable multicast streaming at the same time. For more information, please refer to

RTSP Streaming on page 91.

TCP

: This protocol guarantees the complete delivery of streaming data and thus provides better video

quality. The downside of this protocol is that its real-time effect is not as good as that of the UDP protocol.

HTTP

: This protocol allows the same quality as TCP protocol without needing to open specific ports for

streaming under some network environments. Users inside a firewall can utilize this protocol to allow

streaming data through.

H.264 Protocol Options

Advertising