Vivotek FD9388-HTV 5MP Outdoor Network Dome Camera with Night Vision - Manual (Page 165)

VIVOTEK
User's Manual - 165
© 2019 VIVOTEK INC. All Right Reserved
32
NAME VALUE SECURITY
(get/set) DESCRIPTION
120: GMT 03:00 Baghdad, Kuwait,
Riyadh, Moscow, St. Petersburg, Nairobi
121: GMT 03:00 Iraq
140: GMT 03:30 Tehran
160: GMT 04:00 Abu Dhabi, Muscat,
Baku,
Tbilisi, Yerevan
180: GMT 04:30 Kabul
200: GMT 05:00 Ekaterinburg, Islamabad,
Karachi, Tashkent
220: GMT 05:30 Calcutta, Chennai,
Mumbai, New Delhi
230: GMT 05:45 Kathmandu
240: GMT 06:00 Almaty, Novosibirsk,
Astana, Dhaka, Sri Jayawardenepura
260: GMT 06:30 Rangoon
280: GMT 07:00 Bangkok, Hanoi, Jakarta,
Krasnoyarsk
320: GMT 08:00 Beijing, Chongging,
Hong Kong, Kuala Lumpur, Singapore,
Taipei
360: GMT 09:00 Osaka, Sapporo, Tokyo,
Seoul, Yakutsk
380: GMT 09:30 Adelaide, Darwin
400: GMT 10:00 Brisbane, Canberra,
Melbourne, Sydney, Guam, Vladivostok
440: GMT 11:00 Magadan, Solomon Is.,
New Caledonia
480: GMT 12:00 Aucklan, Wellington, Fiji,
Kamchatka, Marshall Is.
520: GMT 13:00 Nuku'Alofa
daylight_enable <boolean> 6/6 Enable automaticdaylight saving time in
time zone.
daylight_dstactualmod
e <positive
integer> 6/7 Check if current time is under daylight
saving time.
(Used internally)
© 2019 VIVOTEK INC. All Right Reserved
33
NAME VALUE SECURITY
(get/set) DESCRIPTION
daylight_auto_begintim
e string[19] 6/7 Display the current daylight saving start
time.
daylight_auto_endtime string[19] 6/7 Display the current daylight saving end
time.
daylight_timezones string 6/6 List time zone index which support
daylight saving time.
updateinterval 0,
3600,
86400,
604800,
2592000 6/6 0 to Disable automatic time adjustment,
otherwise, it indicates the seconds
between NTP automatic update
intervals.
restore 0,
<positive
integer> 7/6 Restore the system parameters to default
values after <value> seconds.
reset 0,
<positive
integer> 7/6 Restart the server after <value> seconds
if <value> is non-negative.
restoreexceptnet 0,
<positive
integer> 7/6 Restore the system parameters to default
values except (ipaddress, subnet, router,
dns1, dns2, pppoe).
This command can cooperate with other
“restoreexceptXYZ” commands. When
cooperating with others, the system
parameters will be restored to the
default value except for a union of the
combined results.
restoreexceptdst 0,
<positive
integer> 7/6 Restore the system parameters to default
values except all daylight saving time
settings.
This command can cooperate with other
“restoreexceptXYZ” commands. When
cooperating with others, the system
parameters will be restored to default
values except for a union of combined
results.
restoreexceptlang 0, 7/6 Restore the system parameters to default