NordicTrack ROUTER WITH VOICE 3G10WV - Manual (Page 11)

3G10WV HSPA Wi-Fi Router with Voice – 11
Quick Setup
2.1 Setup Procedure
These steps explain how to quickly setup your G router:
1: Attach the two G antennas provided to the ports marked Main and AUX on the back of the router. The
antennas should be screwed in a clockwise direction.
2: Insert your SIM card (until you hear a click) into the USIM slot at the back of the Router.
: Connect the yellow networking cable to one of the yellow ports found at the back of the Router.
4: Connect the other end of the yellow networking cable to the port on your computer.
5. If required, connect a standard Analogue Telephone to the port labeled “Phone” using an RJ-11 Cable (not
included)
6: Connect the power adapter to the Power socket on the back of the Router.
7: Plug the power adapter into the wall socket and press the power button into the ON position (in).
8: Configure the router through the Web User Interface (WUI).
NOTE: Chapters  through 8 explain how to setup and use the WUI
9: Save the router configuration and reboot (see section 6.4).