Example 4 – NordicTrack ROUTER WITH VOICE 3G10WV User Manual

Page 89

Advertising
background image

3G10WV HSPA Wi-Fi Router with Voice – 89

[--rmac <MACaddress>] [--rmac4 <MACaddress>]
Options:
--mode <ap|wds>
Description: configure wireless AP mode.
Default value: ap
--restrict <enabled|disabled>
Description: enable or disable bridge restrict mode.
Default value: disabled
--rmac1 <MACaddress>
--rmac2 <MACaddress>
--rmac <MACaddress>
--rmac4 <MACaddress>
Description: set remote bridge MAC address
Note: The “--restrict” option have to be enable before setting any restrict MAC address (--rmac1~4) or the

restrict MAC address setting will be ignored.
The behavior of WDS is similar to connecting two or more AP using a hub. However, please be aware of the

IP assignment to prevent assigning two or more hosts / STAs to the same IP address. To avoid IP address

conflict, only enable DHCP server in one router and disable the other router DHCP server.
WDS CLI (command line interface) does NOT support Enable (Scan) mode in Bridge Restrict while using

WUI (Web UI) does. When Bridge Restrict set to Enable (Scan) mode in WUI, the CLI will show Bridge Restrict

disabled.

Example 4:

After example , the user want to connect another AP which has DHCP disabled and the MAC address is

00:12:4:56:78:9a
wlan wds --mode wds --restrict enabled --rmac1 00:12:4:56:78:9a

Show wireless LAN interface configurations
Description: show the current configuration of the wireless LAN interface
Synopsis:
wlan info [--config] [--security]
[--macfilter] [--wds] [--station]
Options:
--config
Description: display the list of parameters from config option
Example:

Advertising