NordicTrack ROUTER WITH VOICE 3G10WV User Manual
Page 82
82 –
3G10WV HSPA Wi-Fi Router with Voice
> wlan
wlan command usage :
wlan config [option]
wlan security [option]
wlan macfilter [option]
wlan wds [option]
wlan info [option]
wlan –help
Each option will be explained separately below.
Note: The settings changed from these commands take effect immediately and will be updated on the web
page
1. Please enable the wireless BEFORE changing other wireless settings.
2. The wlan command will save the configuration into flash memory and the new settings will be saved.
Since the settings changed from wlan command take effect immediately, it is not recommended to modify the
wireless settings through the Web UI at the same time.
G10WV - HSPA 7.2Mbps Wi-Fi Router with Voice USER GUIDE
Configure basic Wireless LAN features
Description: Configure basic wireless LAN features such as enable or disable the wireless LAN interface, hide
the network from active scans, set the wireless network name (also known as SSID) and restrict the channel
set based on country requirements.
Synopsis:
wlan config [--enable <0|1>] [--hide <0|1>]
[--ssid <ssidStr>] [--country <countryStr>]
[--isolate <0|1>]
[--channel <channelVal>] [--rate <rateVal>]
[--mrate <rateVal>]
[--rts <rtsThreshold>] [--frag <fragThreshold>]
[--dtim <dtimInterval>] [--beacon <beaconInterval>]
[--xpress <on|off>] [--gmode <auto|performance|lrs|802.11b>]
[--gprotect <off|auto>] [--preamble <long|short>]
Options:
--enable <0|1>