NordicTrack ROUTER WITH VOICE 3G10WV - Manual (Page 83)

3G10WV HSPA Wi-Fi Router with Voice – 8
Description: Enable or disable wireless LAN interface.
Valid value: 0 or 1
0 – disabled the wireless LAN interface.
1 – enabled the wireless LAN interface.
Default value: 1
--hide <0|1>
Description: Hide wireless LAN network name (SSID).
Valid value: 0 or 1
0 – not hide wireless LAN SSID.
1 – hide wireless LAN SSID
Default value: 0
--ssid <ssidStr>
Description: Set Wireless LAN network name (SSID).
Valid value: 2 characters string
--country <countryStr>
Description: Set Wireless LAN Country, only accept abbreviation.
Valid value: 2 or  characters string (AUSTRALIA is abbreviated to AU).
--isolate <0|1>
Description: Set wireless devices isolation. When enabled, wireless devices connected to the router will not be
able to communicate to each other
Valid value: 0 or 1
0 – not isolate wireless devices.
1 – isolate wireless devices
Default value: 0
--channel <channelVal>
Description: Set the wireless LAN channel.
Valid value: 0~14
0 means auto select channel.
Default value: 0
--rate <rateVal>
Description: Set the wireless LAN data rate.
Valid value: 0, 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 6, 48, 54 (Mbps)
0 means auto