NordicTrack ROUTER WITH VOICE 3G10WV - Manual (Page 60)

60 – 3G10WV HSPA Wi-Fi Router with Voice
The G10WV HSPA 7.2Mbps Wi-Fi Router with Voice allows you to make telephone calls over the G Mobile/
Cellular Telephone network using a standard Analogue Telephone via the built in RJ-11 Phone port.
Please refer to the documentation provided by the manufacturer for operating your Analogue Telephone.
Note that your SIM card and Mobile service needs to be provisioned for Voice Calling. Please consult with your
Network Provider for verification.
Note that any telephone calls placed using the G10WV may incur call usage charges determined by your
Network Provider. Please consult with your Network Provider for verification.
8.1 Configuring your G10WV for placing Voice Calls
Once your G10WV has been correctly configured to access the mobile network as outlined in Section 2.1
– Quick Setup, you can make and receive telephone calls after connecting your Analogue Telephone to the socket
labeled Voice on the back of your HSPA 7.2Mbps Wi-Fi Router with Voice.
Region specific dial-tones can be configured via the Web-User Interface by following the instructions in Section 
Web User Interface and by selecting “Voice” from the menu at the top of the page.
To configure the G10WV to use dial-tones from a specific region, please select the relevant country from the
drop down list shown on this page, and click “Apply and save all Parameters” to save and apply this change.
Voice