Full, Insert discxxx, No audio – Zoom MRS-1266 User Manual
Page 163: No data, No disc, Notblank, Not cd-r, Hdd full, Prj full, Problems with cd-r/rw drive
Appendix
ZOOM MRS-1266
163
Problems with CD-R/RW drive
■ Cannot play audio CD created with MRS-1266 on
ordinary CD player
• Check whether the disc was finalized.
• Check whether the CD player is an old model.
On some old CD players, CD-R/RW discs will not play
properly as audio CDs, even if the disc was finalized.
• Discs created using CD-RW media will not be playable
on an ordinary CD player.
■ Cannot write audio data to CD-R/RW disc
• Check whether the disc was already finalized.
■ Cannot perform backup
• Check whether audio data have already been written to
the disc.
■ Cannot list a project spanning several discs
• Check whether the proper disc has been inserted.
When a project backup spans several discs, insert disc
number 1. When the entire hard disk was backed up,
insert the first disc that contains data of the desired
project.
Other problems
■ Cannot save the project
• The project cannot be saved if the Protect setting is on.
Turn protect off (
→p. 141).
■ Cannot use the tuner
• The tuner cannot be used if the insert effect is inserted in
a location other than the input mixer. Change the insert
location to the input mixer.
■ Cannot create a new project or copy a project
• If the display indicates "FULL", this means that 1,000
projects already exist, and no further projects can be
created. Delete unwanted projects.
■ Cannot record on an external recorder connected to
the [OUTPUT] (DIGITAL) jack
• Make sure that the external recorder is set to a sampling
frequency of 44.1 kHz.
• Make sure that the external recorder supports the S/P DIF
audio format.
■ One of the following messages is shown when
attempting to execute a command.
FULL
There is not enough free space on the CD-R/RW disc.
INSERT DISCxxx
Insert the disc with the number xxx.
NO AUDIO
The disc in the CD-R/RW drive is not an audio disc.
NO DATA
The specified data do not exist.
NO DISC
No disc is inserted in the CD-R/RW drive.
NotBLANK
The CD-R/RW disc is not empty.
NOT CD-R
The disc inserted in the CD-R/RW drive is not a CD-R/RW
disc.
HDD FULL
There is not enough free space on the internal hard disk.
PRJ FULL
No more projects can be created on the internal hard disk.