Zoom MRS-1266 - Manual (Page 51)

Reference [Recorder]
ZOOM MRS-1266
51
Playing back the same passage
repeatedly (A-B Repeat function)
A-B Repeat is a function that repeatedly plays back a desired
region of the song. This is useful when you want to listen to
the same region repeatedly.
1.
Move to the point at which you want to begin
repeat playback, and press the [A-B REPEAT] key
in the control section.
The [A-B REPEAT] key flashes, and the repeat start location
(point A) is specified.
H INT
The A/B point can be specified either during playback or
when stopped.
2.
Move to the point at which you want to end repeat
playback, and press the [A-B REPEAT] key once
more.
The [A-B REPEAT] key will change from flashing to constantly
lit, and the repeat end location (point B) will be specified.
N OTE
If you specify a point B that is located earlier than point A, the
region from points B → A will be played repeatedly.
3.
If you wish to redo the A/B point setting, press the
[A-B REPEAT] key so that it goes out, and then
repeat the procedure from step 1.
4.
To begin repeat playback, press the PLAY [ R ] key.
Repeat playback will begin when you press the PLAY [ R ]
key while the [A-B REPEAT] key is lit. When the end point
(normally point B) is reached, the recorder jumps to the start
point (normally point A), and playback continues.
5.
To stop repeat playback, press the STOP [ P ] key.
Even after pressing the STOP [ P ] key to stop playback, you
can perform repeat playback again as many times as desired,
as long as the [A-B REPEAT] key is lit.
6.
To turn off repeat playback, press the [A-B
REPEAT] key.
The [A-B REPEAT] key goes out, and repeat playback will
be turned off. The A/B point locations also will be erased.