Zoom MRS-1266 - Manual (Page 37)

Quick Tour
ZOOM MRS-1266
37
1.
Press the ZERO [ U ] key to return to the beginning
of the song.
2.
Repeatedly press the [MASTER] status key so that
the key lights up in red.
The master track can now be recorded.
3.
Hold down the REC [ O ] key and press the PLAY
[ R ] key.
Recording on the master track starts. The signal after passing
the [MASTER] fader (and processed by the insert effect and
send/return effect) is recorded.
4.
When recording is completed, press the STOP [ P ]
key.
The recorder and rhythm section is stopped.
5.
Repeatedly press the [MASTER] status key until it
is lit in green.
When the key is lit in green, the master track can be played
back. At this time, the other status keys ([DRUM], [BASS],
1 - 8, 9/10) are automatically muted.
6.
Press the ZERO [ U ] key to return to the beginning
of the song, and press the PLAY [ R ] key.
The master track is played back. To stop playback, press the
STOP [ P ] key.
7.
To return to MRS-1266 operation, repeatedly press
the [MASTER] status key until it is out.
Muting of other tracks and sounds except for the master
track is canceled, and the status keys revert to the original
condition.
H INT
• With the CD-R/RW drive, you can record the contents of
the master track onto CD-R/RW media to create an audio
CD. For details, refer to page 129.
• The contents of the master track can also be edited later.
1
1
2
3
4
5
6
7
8
9
10
2
V-takes
3 4 5 6 7 8 9/10 11/12
Mixdown
Master track Track