Zoom MRS-1266 - Manual (Page 36)

Quick Tour
ZOOM MRS-1266
36
5-3 Using the mastering effect
You can place the insert effect immediately before the
[MASTER] fader and use one of the MASTERING
algorithm patches to modify the dynamics or tone of the
entire song. To apply an insert effect to the entire song,
proceed as follows.
■ Changing the insert location of the insert
effect
1.
From the main screen, press the [INPUT SOURCE]
key in the effect section.
The key flashes, and the indication "IN SRC IN" appears on
the display. From this screen, you can change the insert
position of the insert effect.
2.
Turn the dial to bring up the indication "IN SRC
MASTER" on the display.
Now the insert effect is inserted immediately before the
[MASTER] fader and can process the signal of the entire
song.
H INT
The insert effect can also be inserted into any desired track
of the mixer, or in the drum/bass signal path ( → p. 119).
3.
Press the [EXIT] key.
The unit returns to the main screen.
■ Selecting a patch for the insert effect
4.
Press the [MASTERING] key in the effect section.
The MASTERING algorithm will be selected for the insert
effect. The currently selected patch is shown on the display.
5.
Turn the dial to select the desired patch.
6.
Press the PLAY [ R ] key to play back the song.
The entire song will pass through the insert effect
immediately before the [MASTER] fader. If desired, you
can edit the currently selected patch to make detailed
adjustments to the way in which the effect is applied.
7.
When you have achieved the desired sound,
press the STOP [ P ] key and then the [EXIT] key.
The unit returns to the main screen.
5-4 Recording the master track
As the final step, you will record (mix down) the completed
song onto the master track. This is a stereo track designed
only for use during mixdown. Like the other tracks, the
master track also has 10 V-takes.
IN SRC IN SRC
IN
IN
IN SRC IN SRC
MASTER
MASTER
DRUM BASS 1 2 3 4 5 6 7 8 9/10
MASTER
(11/12)
0 0
INSERT INSERT
PlusAlfa
PlusAlfa