Zoom MRS-1266 - Manual (Page 35)

Quick Tour
ZOOM MRS-1266
35
5-2 Using the send/return effect
The send/return effect is internally connected to the send/
return loop of the mixer. The MRS-1266 allows you to use
two types of send/return effects: reverb and chorus. The
following diagram shows the signal flow of the send/return
effect.
The amount of signal sent to each effect (send level) adjusts
the depth of each send/return effect for each track or for the
drum/bass sound. Raising the send level will increase the
amount of signal that is sent to the effect, producing a deeper
effect for that track.
In this example, we will select a send/return effect patch, and
adjust the send level of each track to adjust the amount of
reverb and chorus.
■ Selecting the send/return effect patch
A newly created project contains 30 patches for reverb and
chorus/delay. To select a patch, proceed as follows.
1.
Press the [REVERB] key or [CHORUS/DELAY] key
in the effect section.
Press the [REVERB] key to select a reverb patch, or the
[CHORUS/DELAY] key to select a chorus/delay patch. The
display will indicate the patch that is currently selected for
the effect you selected. The screen shown below is an
example of what is shown when the [REVERB] key is
pressed.
2.
Turn the dial to select a patch.
3.
When you have finished selecting the patch, press
the [EXIT] key.
The unit returns to the main screen. If desired, press the
[CHORUS/DELAY] key next and select a chorus/delay
patch.
■ Adjusting the send level
4.
Press the [CHORUS/DELAY SEND] key or the
[REVERB SEND] key in the track parameter
section.
Press the [REVERB SEND] key if you want to adjust the
reverb send level, or the [CHORUS/DELAY SEND] key if
you want to adjust the chorus/delay send level. When you
press the key, the current effect send level for the track or
drum/bass sound whose status key is lit appears on the
display. For example, when the [REVERB SEND] key is
pressed, a screen such as shown below appears.
5.
Press the status key of the track whose send level
you want to adjust (or the [DRUM]/[BASS] status
key).
The send level value of the selected track or sound will be
displayed.
6.
Press the PLAY [ R ] key, and while the song plays
back, turn the dial to adjust the send level value.
7.
Adjust the send level for other tracks and sounds
in the same way.
8.
When you have finished making the settings, press
the [EXIT] key.
The unit returns to the main screen.
DRUM BASS 1 2 8 9/10 MASTER
REVERB
CHORUS/
DELAY
REVERB
SEND LEVEL
CHORUS/
DELAY
SEND LEVEL
Return
Send
Patch name Patch number
8
SEND REV SEND REV
VcxRev
VcxRev
Track/sound name Send level setting
0 0
TR2 TR2
REV SEND
REV SEND