Extron Electronics MGP 462xi Series - Manual (Page 24)

MGP Series • Operation 3-2
Operation
PRELIMINAR
Y
You can set up and operate the MGP by using:
• The front panel controls
• A computer, a touch screen panel, or any other device that can send and receive
serial communications through either serial port or through the LAN port.
Settings can be adjusted through the host computer using Extron’s Simple
Instruction Set (SIS ™ ) or the Windows-based control software.
• A computer or other device using an Ethernet connection and IP protocol (Telnet
or a Web browser).
This chapter discusses the functions available through the front panel. For details
on setup and control via RS-232/RS-422, see chapter 4, “ Software Configuration
and Control ”; for Ethernet, see chapter 5, “ HTML Configuration and Control .”
Front Panel Features
MGP 464
MULTI-GRAPHIC PROCESSOR
1 2
1 2
3 4
3 4
PRESET
RECALL
/SAVE
ENTER
FREEZE
WINDOW/
IMAGE
SIZE
WINDOW/
IMAGE
POSITION
CONFIG
BRIGHT/
CONT
COLOR/
TINT
DETAIL
WINDOW/
IMAGE
ZOOM
MENU NEXT
5 8 11 14 17
6 9 12 15 18
7 10 13 16 19
VIRTUAL VIDEO INPUTS
RGB / HD / VIDEO INPUTS
WINDOW SELECT
ADJUST
2 3 4 5 6 7
8 9 10
1
MGP 464 Series front panel
MGP 462xi
MULTI-GRAPHIC PROCESSOR
1 2 3 4
1 2
PRESET
RECALL
/SAVE
ENTER
FREEZE
WINDOW/
IMAGE
SIZE
WINDOW/
IMAGE
POSITION
CONFIG
BRIGHT/
CONT
COLOR/
TINT
DETAIL
WINDOW/
IMAGE
ZOOM
MENU NEXT
5 8 11 14 17
6 9 12 15 18
7 10 13 16 19
VIRTUAL VIDEO INPUTS
RGB / HD / VIDEO INPUTS
WINDOW SELECT
ADJUST
2 5 6 7 1
10 8
3
9
4
MGP 462xi front panel
1 Freeze button — Press this button to freeze the image in the currently selected
window on the display. The image remains frozen until the Freeze button is
pressed again, or a different input is selected.
2 RGB/HD/Video Inputs selection buttons — Press these buttons to select fully
configurable inputs 1 through 4. On the MGP 464/462xi DI models, these
buttons can also select the four DVI inputs, depending on the unit’s input
configuration. On the MGP 464/462xi HD-SDI, input buttons 1 and 2 can
select the HD-SDI inputs and buttons 3 and 4 can select the DVI inputs. When
one of these buttons is pressed, its input signal switches to the window that is
currently selected ( d ).